Replace that dirty, cracked, or leaking skylight and let the sunshine in. This exterior skylight fits a 16" x 26" cutout. Made from UV-resistant polycarbonate, it holds up against the sun without turning brittle or yellow.
Replacing your skylight should not be a regular job. This one is built to resist sun damage and last for years, keeping your RV protected from leaks and exposure.
No need for modifications - this skylight is made to fit standard 16" x 26" openings. Once installed, it sits flush against the roof, sealing securely when paired with the right sealant.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer.com. Today we're looking at our Specialty Recreation replacement RV skylight, smoke color, and it's going to fit a 16 by 26-inch cutout. Now, folks, that being said, this obviously is polycarbonate. Smoke color, it's going to soften the light and give you a nice comfortable interior. Again, it fits a 16 by 26 cutout, however, it has a 30-inch by 20-inch flange all the way around there. So again, nice, smoke color.
Hoping you can see through that a little bit. You're going to get the picture. You're also going to get this tube of SR140. That is the sealant that's going to come with it. You will need screws, not included, for the installation.
All the holes have been drilled out from the manufacturer, though. And as you can see, the bubble height is approximately 4-1/2 inches. Just keep in mind that bubble height can vary depending on the molds and the stuff they had at the time when they we inchesre making it. It's not an exact measurement on that bubble height, but the exterior is that 20 by 30 flange. You not have to worry about warping, lifting between screws, or anything.
This will stand up to the sun exposure without cracking or discoloring. And that's going to wrap it up for our look together. I'm Steven, thanks for watching.
All Good!
Received just in time!
Installed in a couple of hours with removal of old skylight. Fit perfect.
the product was delivered on time and the fit was great.
The shell is thicker than the existing one. It arrived on time and was in good shape.
Excellent experience as always with etrailer !
Everything worked out great, looks great, exactly what I needed.
Light went in as well as expected. Size was accurate and it’s held up well.
Overall, these are very good replacement skylights. They're molded very well, and are slightly thicker than the original one on my TT that had cracked and been leaking unbeknownst to me since last year. The only complaint is that they're predrilled, and at least 5 of the holes were too close to screw holes from the
original skylight which I didn't want to reuse. Drilling extra holes with virtually no splitting or spalling wasn't difficult at all, but this left 5 irregularly spaced open holes in the skylight edge that simply ended up being filled when the butyl rubber sealant was being compressed as it was screwed into position. The end result should still be very robust and decent looking after I'm able to apply the selected lap sealant as soon as weather permits, but I could have easily established my own optimal screw hole pattern if there had been no predrilled holes. Still very pleased, though.
Nice solid piece, it feels stronger than the original that's replacing. The Smoke tint will help reduce temperatures in the RV.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.